
Sprinkler System Repair
When several things are wrong at once, or you just moved in and do not know what you have, we go through the whole system. Call (346) 627-2444.
What we check
We start at the controller, run every zone, and walk each one while it waters: heads rising, nozzles matched, arcs set, no geysers or bubbling ground. Then we open valve boxes, check splices and solenoids, look at the backflow device, and test the rain sensor.

Common findings
- Broken or buried heads and mismatched nozzles
- Valve boxes full of silt or fire ants
- Lateral leaks near tree roots
- Zones with more heads than the water supply can run
- A rain sensor missing, broken or bypassed
- Run times that are far too long for sandy soil, or too short
Setting it up after
We set run times for your soil, sun and grass and match the days to your water provider's rules. Read who sets the watering rules where you live.
What you get at the end
When we finish, every zone has been run and checked, broken parts are replaced with matching ones, valve boxes are cleared so the valves can be reached, and the controller is set for the season with a working rain sensor. We also show you where the irrigation shut-off valve is, so you can stop the water yourself if something breaks later. If something is worn but still working, we tell you so you can plan for it instead of being surprised.
Questions people ask us
I just bought the house. Should I get the system checked?
How long does it take?
Sprinklers acting up? Give us a call.
Tell us what the system is doing and where you are. Most calls turn out to be a broken head, a stuck valve, a leak or a controller problem, and a few questions on the phone usually tell us which.
Call (346) 627-2444